Ludlum Medical Physics Model L-011A Mammography Tissue Equivalent Phantom

The Model L-011A Tissue Equivalent Mammography Phantom is a realistically shaped (compressed breast) phantom that will provide the QA Technologist or Medical Physicist with the necessary information to evaluate any mammographic system.

Ludlum Medical Physics Model L-013 Mammography Stereotactic Needle Biopsy Training Phantom

The Model L-013 Stereotactic Needle Biopsy Training Phantom is a disposable training tool and practice medium for mammography needle biopsy procedures. The phantom can also be used as a QA device for Stereotactic Systems.
 

Ludlum Medical Physics Model L-014A Mammography AEC System Consistency/Artifact Phantom

The CIRS Model L-014A, Phototimer (AEC) Consistency Testing Slabs are designed to assess the AEC system performance of the Mammography unit, in accordance with the (ACR) American College of Radiology and MQSA recommendations.

Ludlum Medical Physics Model L-014C Mammography AEC System Consistency/Artifact Phantom

Also available in the BR-12 material is the Model L-014C Artifact Evaluation Phantom. This phantom provides a uniform cassette sized (18 x 24cm) set of two plates, measuring a total 4cm thickness, as recommended by the ACR and MQSA.

Ludlum Medical Physics Model L-015 Mammographic Accreditation Phantom

The Ludlum Fluoroscopic Beam Alignment device consists of an aluminum plate with 4 sliding brass strips set in recessed channels. The strips define the border or visible area of the image receptor. A plastic overlay prevents any vertical displacement of the brass strips. Holes drilled in half inch intervals are filled with higher density material for visibility through the brass strips. The device when placed in the center of the image receptor is designed to correct or optimize fluoroscopic collimation.  

Ludlum Medical Physics Model L-016A Mammography BR-12 Single Exposure Contrast Resolution Phantom

The CIRS Model L-016A Single Exposure High Contrast Resolution Phantom is made up of a set of 3 BR-12 (or BR-50/50) plates, measuring 12.5cm x 10cm each, with a combined thickness of 4.5cm, as recommended by the ACR and MQASA.

Ludlum Medical Physics Model L-085 Mammography Full Field Digital Phantom

The Model L-085 Full Field Digital Mammography Resolution Phantom is specifically designed to monitor new digital mammography systems utilizing the high quality, low noise CCD (charge-couple device) digital sensors.