INDICATED USE: Single channel analyzing, gross counting
SUGGESTED DETECTORS: GM, proportional, scintillation
CONNECTOR: Series “C” (others available)
SCALER: 6 digit LED display providing a range of 0 - 999999 counts
SCALER LINEARITY: Reading within 2% of true value
TIMER: Pushwheel adjustment from 0 - 999 minutes with selectable X0.1 and X1 multipliers
RATEMETER: 0 - 500,000 cpm total range
METER DIAL: 0 - 500 cpm, 0 - 2.5 kV, BAT TEST
MULTIPLIERS: X1, X10, X100, X1000
RATEMETER LINEARITY: Reading within 10% of true value
RESPONSE: Toggle switch for FAST (4 seconds), or SLOW (22 seconds) from 10% to 90% of final reading
ZERO: Pushbutton to zero meter
HIGH VOLTAGE: Adjustable from 200 - 2500 volts (will support 60 megohm scintillation loads)
THRESHOLD: Adjustable from 1.00-10.00
WINDOW: Adjustable from 0 to 10.0 above the threshold setting (can be enabled or disabled)
DISCRIMINATOR: Adjustable from 2-100 mV at threshold setting of 1.00
RS-232: 9 pin connector allowing for printer or computer interface.
METER: 2.5" (6.4 cm) arc, 1 mA movement analog type
POWER: 85 - 250 Vac, 50-60 Hz or 4 each “D” cell batteries
BATTERY LIFE: Typically 120 hours with alkaline batteries (battery condition can be checked on meter)
TEMPERATURE RANGE: -4° F to 122° F (-20° C to 50° C) May be certified to operate from -40° F to 150° F (-40° C to 65° C)
SIZE: 8.5" H x 5" W x 9.3" D (21.6 x 12.7 x 23.5 cm)
WEIGHT: 6.9 lbs (3.1 kg) without batteries
 

Optional Printer Specifications

Can be setup to provide date/time stamp on each line.

POWER: comes with 120 Vac wall transformer, outputs 9 Vac
SPEED: 33 lines per minute
PAPER ROLL: standard 2.25" wide calculator paper
RIBBON LIFE: 200,000 characters
REPLACEMENT RIBBON: Epson HX-20 cartridge
SIZE: 4.05" W x 4.5" D x 2.0" H (10.3 x 11.4 x 5.1 cm)

• Shielded Well Gamma Sample Counter Head - Model 243